Energy
With more than 90 years of tradition, Axtone is an expert in impact energy absorption technology. Across mission-critical applications including defense, industrial, rail, automotive, heavy vehicle and power generation, operators demand the highest standards for safety, durability and performance and trust Axtone to design and deliver customized energy absorption components and solutions.
Springs
The main applications of coil springs in this sector are pipe support systems, both spring hangers and spring supports. Our coil springs compensate for slight vertical displacements in the pipeline. The functioning of pipe support systems is based on preset coil springs. Other applications are: ball mills, safety valves, valve actuators, medium and high voltage electrical transmission systems, control devices for oil and gas applications.
With more than four decades of industry-leading experience and a culture of forward-looking innovation, BIW Connector Systems designs and delivers highly engineered electrical penetrator solutions for the upstream oil and gas industry, performing safely and reliably in the harshest environments to help oil and gas companies meet the demands of their global customers.
Uni-Lok Wellhead Penetrator System
Uni-Lok™ provides quick, easy pass-through of ESP power at a competitive price. It offers a complete verified pressure block inside the tubing hanger, delivering safety at the wellhead without the added costs of extreme pressure-blocking penetrators.
Presta GS Mechanical Splice
Presta™ GS offers a reliable, affordable and easy-to-assemble alternative to traditional hand-tape splices for new and workover ESP completions. This innovative product is designed to make uniform, reliable splices quickly and with minimal training.
Metal-Lok Wellhead Penetrator
When improved product lifetime, performance and efficiency are critical to ESP production completions, the Metal-Lok™ Wellhead Penetrator System offers a proven, lower cost, easy-to-use and highly reliable solution, no matter the conditions or environment.
From seawater to heavy fuel, the properties of media being conveyed through ITT Bornemann pumps vary widely by viscosity, pressure, volume and temperature. With numerous ground-breaking pump developments over the decades, ITT Bornemann provides proven pumping solutions for customers in industries including chemical, food &beverage, oil & gas and medical & pharmaceutical for nearly any conveyed media.
MPC 208
The Bornemann MPC multiphase boosting pump is mostly applied in mature fields with declining reservoir pressure. In order to optimise the production, it is essential to reduce the wellhead backpressure. Additionally it is used to recover vapour from the casing annulus, e.g. with pumped wells, and in thermal operations using cyclic steam stimulation or steam assisted gravity drainage (SAGD).
HP
The Bornemann HP twin screw pump is designed with external bearings and timing gears lubricated with clean lube oil. External lube oil or cooling systems are not required what keeps the system as simple as possible and subsequently increases the reliability of the system.
MSL
The Bornemann MSL multiphase boosting pump is a real Multiphase Pump with all the wellknown Bornemann MP-features. She is especially suited for single wells already being equipped with downhole pumps.
With the increased use of robotics and the drive toward greater automation, industrial manufacturers increasingly require powerful, durable and highly configurable motion control products. Compact Automation delivers innovative components such as air cyliders, grippers, slides and actuators needed to solve complex problems in general industrial, food and beverage, material handling, oil and gas, and automotive applications.
Val-U-Act Series
COMPACT® Val-U-Act® and Class-Act® are double acting and spring return pneumatic valve operators. Operates 1/4” through 12” ball, plug and butterfly valves.
Conoflow designs and manufactures low and high pressure regulators, filter regulators, positioners, transducers, actuators and diaphragm seals in a wide variety of materials and configurations to meet a broad range of industrial process control applications worldwide. Complimenting this industrial product lineup is an extensive range of innovative products focused on alternative fuel sources, such as an environmentally-friendly compressed natural gas (CNG) regulator.
GH20 Series (303 Stainless Steel Internals) Service Pressure Reducing Regulator
Conoflow's Service (GH20 Series) Regulators are rugged units with flow capacities and performance characteristics which allow the units to operate in both instrument and industrial applications. Buna "N" diaphragms are standard in the aluminum units.
GVB/GVB12 Series Snap-Acting Relays
Designed for pneumatic systems, Conoflow Series GVB Snap-Acting Relays change ports to switch or lock in secondary air source when the main supply pressure fails below a predetermined set point. In the event of supply or pilot pressure failure, the positive action relay with one common and two inlet or outlet ports.
HP635 Series High Pressure Regulator
Conoflow's HP635 Series unit is a high-flow, high-purity regulator that is designed as a purge gas regulator and may be used in high purity gas systems involving corrosive and toxic media. All wetted components are of a 316 Stainless Steel construction having a maximum 35Ra surface finish. An optional brass model (NPT port only) is available for inert gas service.
Offshore production platforms, particularly those in remote and deep water locations must have a reliable and cost-effective source of fresh water to operate effectively. Focused solely on solving critical problems for oil and gas operations, ITT C’treat solutions play a major role in addressing global water supply challenges on more than 400 offshore installations.
Reverse Osmosis Watermaker
C'treat builds a complete range of Reverse Osmosis (RO) watermakers to meet the wide variety of demands of the offshore drilling and production industry. Each packaged system is designed and built for simple operation and ease of maintenance. Many special system components have been developed and optimized for use in the offshore environment. C'treat can build your watermaker inside an integrated container.
Ultraviolet Disinfection
C’treat ultraviolet disinfection systems are specifically designed for the demands the offshore energy sector.
Custom Water Systems
C’treat systems are built to customer specifications and our designs are flexible enough to meet a range of requirements both in footprint and production capacity. In places where space is limited, we can design a system to fit available areas for installation. C’treat watermakers can be built in integrated, single-skid configurations, or split by process to make the best use of available space and connections.
Whether handling delicate biopharmaceutical compounds, corrosive and erosive chemicals, or the most abrasive mining slurry, manufacturers require industrial valve solutions that solve their unique challenges. With more than 60 years of building innovative and reliable valves, ITT Engineered Valves has the right valve solution for the most critical applications, with proven performance in various industries including chemical processing, food & beverage, industrial process, mining, oil & gas, power generation, and medical & pharmaceutical.
Cam-Tite Ball Valve
Cam-Tite ball valves are engineered to provide the very best performance for demanding hazardous and corrosive applications. Designed to overcome such inherent valve problems as high operating torque and stem leakage, Cam-Tite ball valves unique configuration minimizes pressure on the seating areas, thus reducing cold flow and prolonging seat life.
Dia-Flo Diaphragm Valve
Dia-Flo diaphragm valves are engineered for tough applications in the chemical processing, mining, power generation, pulp and paper, and water treatment industries. Dia-Flo weir-type diaphragm valves are utilized to handle media that is corrosive, erosive, or contains solids, which tend to clog other types of valves.
Fabri-Valve 33PTA Slurry Valve
The Fabri-Valve 33 PTA Heavy Duty Slurry Valve incorporates a push-through design for heavy slurry service. This full ported valve eliminates turbulence and has no metal parts in contact with media. Sleeves are molded with an integral, fully encapsulated, stiffener ring and are replaceable without disassembling the valve.
Fabri-Valve CF33/133 Ported Slide Gate
Fabri-Valve Figures C33 / C133 / F33 / F133 are bi-directional soft seated, slide gate valves designed for on/off service in heavy slurries. Specially designed body liners and constant contact seats minimize seat stress ensuring exceptional service life.
Fabri-Valve HD 150/300 Knife Gate Valve
The Fabri-Valve HD line of Heavy Duty Knife Gate Valves are specifically designed to withstand abrasive, high pressure oil sands slurries. The HD Valve features a carbon steel body with ANSI B16.34 wall thickness and ANSI B16.5/B16.47 full face flanges. The body has a double replaceable seat configuration that provides bi-directional shutoff.
Whether protecting structures from seismic events, preventing mechanical shock in automated and storage retreival systems, or providing noise abatement in passenger aircraft, Enidine has unique product solutions to meet these critical challenges. For close to 60 years, Enidine has produced highly engineered energy absorption and vibration isolation components such as shock absorbers, rate controls, air springs, wire rope isolators and heavy duty buffers for critical end-markets including, robotics, food and beverage, general industrial, oil and gas, automotive, military and commerical aviation.
Viscous Dampers
Viscous dampers (also known as seismic dampers) are hydraulic devices that dissipate the kinetic energy of seismic events and cushion the impact between structures. They are versatile devices that can be designed to allow free movement as well as controlled damping of critical structures such as buildings and bridges to protect them from wind load, thermal motion, or seismic events.
Visco-Elastic Support (VES)
One of the most efficient forms of renewable energy is hydro-electricity. A typical hydropower plant will produce electricity by the use of hydro-electric generators. Problems arise with these generators over time due to high frequency vibrations excited by periodic and stochastic forces originating in the hydraulic machines and generator.
Enidine has developed the new Visco-Elastic Support (VES) product line to provide improved dynamic behavior of the rotor-bearing system and thermal force reduction to bearing support structures.
WEAR Pipe Restraints
WEAR™ (Wire Energy Absorbing Rope) pipe restraints are uniquely packaged wire rope isolators designed to protect structures from steady state vibration and isolate them from seismic and dynamic loads. These new generation energy absorbing restraints feature simple construction eliminating the problems often associated with hydraulic or mechanical restraints which are complex and prone to failure.
Since the debut of the first all-metal pump in the mid-1800s, the pump engineers at ITT Goulds Pumps have worked closely with industries worldwide to develop the innovative pump products and technologies required by their demanding applications. ITT Goulds Pumps is a world leader in hydraulics, materials science, mechanical design, fluid dynamics and green energy – with extensive experience in nearly every type of driver, bearing, seal, piping and nozzle configuration, flange and baseplate design to meet most pump application needs in sectors including chemical, food & beverage, industrial process, mining, oil & gas, and power generation.
3171
The Model 3171 is the Veteran vertical sump and process pump. Thousands of installations in industrial process, sump drainage, corrosive liquids, pollution control, molten salts attest to the 3171's remarkable performance. Simple mounting.
3393
Model 3393 High Pressure Multistage Ring Section Pump Radially split, segmented casing, multistage pump designed with modular interstage components. Its multiple suction nozzle and discharge nozzle orientations allow adaptation to multiple piping installations. Multiple hydraulics for each pump size optimize efficiency across a vast range of applications.
3600
Model 3600 API 610 (BB3) Heavy Duty Multistage. Advanced design with proven operating history. Axially split, with many enhanced features that make it an extremely reliable, high performance pump well-suited to a wide range of services.
3700
Model 3700 & 3710 API 610 (OH2) Overhung Process High temperature and high pressure process pumps designed to fully meet the requirements of API 610. Center line support for high temperature stability, maximum rigidity. Features tangential discharge for maximum hydraulic efficiency. Available in top suction design (Model 3710).
VIS
Model VIS Vertical Submersible For deep settings or where use of lineshaft pumps is impractical. For irrigation, service water, deep well supply, offshore and mine dewatering.
VIT
Model VIT Vertical Pumps A wide range of hydraulic conditions allows meeting requirements of virtually every pumping service. Designed to meet custom specifications of the user. Model VIT can-type turbine meets API- 610 specifications.
Valves & Actuators that perform in demanding applications, has been our legacy since 1949. Our heavy-duty products are designed and manufactured using the expertise and knowledge that we have created with our customers and by innovating to solve their ever-developing challenges. Superior performance, best-of-breed designs, meeting and certifying for the most demanding industry standards, and durability with minimal maintenance is what our products provide. with our close technical support and engineering cooperation, leaders in multiple demanding industries are speccing our valves, actuators, and valve automation solutions in their products and systems.
Neo-Dyn provides standard and custom compact adjustable switches, pressure switches, hazardous area switches, vacuum switches, and temperature switches for the global oil & gas, chemical process, and energy markets. Our leadership in designing high-performing, reliable, switch technologies such as our patented negative rate disc spring, has set the standard for the industry. Neo-Dyn’s commercial and industrial switches have the highest quality and most competitive pricing available in the industry.
122P NEMA 4X, 7, 9 and 13 Pressure Switch/Internal Adjustment
Compact, adjustable pressure switch for low to mid-range process applications. Efficient Nega-Rate® Belleville disc spring for set point stability and vibration resistance. Wide selection of wetted materials, 316 stainless steel body and interior, plus hermetically sealed explosion-proof electrical make this switch ideal for chemical process applications.
132T NEMA 4 and 13 Temperature Switch/Internal Adjustment
Explosion-proof, hermetically sealed with direct probe or capillary mount. Set-point ranges from -75 degrees F to +650 degrees F.
142P8 NEMA 4X, 7, 9 and 13 Ultra Low Vacuum/Pressure Switch
Ultra low pressure and vacuum to pressure crossover switch. Unique construction using efficient Nega-Rate® Belleville disc spring for stable set points and high proof pressure. Explosion proof enclosure and wide range of wetted materials makes this switch especially well suited for hazardous or corrosive atmospheres.
162P NEMA 4X, 7, 9 and 13 Differential Pressure Switch
Adjustable high pressure differential switch. Rugged construction with efficient Nega-Rate® Belleville disc spring sensing mechanism. Maintains set point at high system pressure. Available in all stainless steel construction with hermetically sealed electrical assembly for corrosive atmospheres.
For owners and operators, equipment reliability and uptime is directly related to profitability. Leveraging vast experience, ITT PRO Services has a goal of improving the profitability of our customers in sectors including chemical, food & beverage, industrial process, mining, oil & gas, power generation, and medical & pharmaceutical by targeting the biggest issues of process uptime and energy costs and by monitoring equipment to help make crucial maintenance decisions before problems occur.
i-Alert
i-ALERT®2 combines the latest in Bluetooth® low energy and sensor technology into a rugged, safe, industrial certified package. i-ALERT®2 puts monitoring and diagnostics in the hands of everyday users, empowering anyone to safely monitor equipment from a distance.
PumpSmart
PumpSmart pump control systems that provide real-time control and protection of your pumps while also providing valuable process insight. By protecting against unplanned pump failure due to process upsets, we can keep your process running longer and eliminate unplanned repair activities.
Repair and Upgrades
PRO Services helps customers develop effective maintenance and asset management programs to lower maintenance costs, improve uptime, reduce inventory costs and extend equipment life. We offer an economical alternative to high maintenance costs.
A specialist in corrosion and wear resistant materials, Rheinhütte Pumpen has a 160-year heritage and is regarded as a leading provider of highly engineered pumps suited for the handling of some of the world’s most aggressive media. With more than 20 different pump types, Rheinhütte’s solutions serve specialty applications for the chemical, mining, renewable energy and refinery processes and include solutions for sulfuric acid, molten sulfur, fertilizer and chlorine-alkali electrolysis production among others.
CPDR Standard Plastic Chemical Pump
The CPDR is a standard plastic chemical pump that complies with ISO 2858, ISO5199. It is most commonly used in chemically aggressive, even contaminated, media throughout the whole range of chemical processing technology, surface coating technology, environ-mental engineering and other areas of industry. Visit Rheinhuette.de for more information.
GVSO Chemical Centrifugal Pump
The GVSO is a vertical metal chemical centrifugal pump that complies with API610 (ISO 13709). Applications include aggressive, contaminated fluids, melts and liquefied gases like H2SO4 at all concentrations, liquid Sulphur, PTA, tars and molten salts. Visit Rheinhuette.de for more information.
RCE Chemical Centrifugal Pump
The RCE complies with API610 (ISO 13709). It is suitable for heavy-duty applications in chemically aggressive and abrasive media with or without a solids content, in chemical processing technology, the primary materials industry and other areas of industry. Typical applications are molten salt, pitch, tar, sulphur, etc. Visit Rheinhuette.de for more information.